• 7-band MASTER EQ section with slide potentiometers
• LED meters display left and right channel output power levels
• Conveniently located MASTER LEVEL control with a large knob
• Level control for MONITOR output

STEREO POWER AMPLIFIER

• Output stage with discrete, high current output devices - not integrated IC amps
• Output power of 2 x 300w RMS with high headroom
• Very efficient cooling, utilizing a large heatsink and two direct-flow fans with variable speed control for quiet operation
• Power supply with low-noise toroidal transformer and a dual voltage (115/230Vac) selector switch
• Comprehensive amplifier and speaker protection circuitry to guard against short circuits, DC offsets, over-heating, turn-on thumps, subsonic and supersonic frequencies.
• Built-in high quality stereo clip limiter
• Equalization customized to enhance and optimize speaker system performance.

7-CHANNEL MIXER FEATURES

• Four channels (Ch. 1-4) with balanced, combo ¼” & XLR mic inputs & balanced ¼” jack line level inputs

• 48Vdc phantom power on balanced combo ¼” & XLR inputs for condenser microphones
• Phantom power can be switched on/off separately on two pairs of inputs. 
• The phantom power on/off switches are securely recessed behind the front panel to avoid accidental switching them on/off.
• PAN, 3-band EQ, MONITOR LEVEL and EFFECT LEVEL controls on each channel

• Stereo input channel (Ch. 5) with high impedance ¼” stereo input can also be used for mono acoustical instruments with a pick-up or as an extra mic using the combo ¼” & XLR connector

• Stereo ¼” input with a high |Z| input impedance to connect variety of stereo sources
• Combo ¼” & XLR inputs to connect either mono acoustic instrument with a pick-up via the ¼” TRS connector or low impedance dynamic mic via the XLR connector
• PAN/BALANCE, 3-band EQ, MONITOR LEVEL and EFFECT LEVEL controls

• Stereo input channel (Ch. 6) for stereo sources

• Dual stereo inputs with ¼” TRS and 3.5mm mini-jack to connect any 2-channel source
• 3-band EQ, MONITOR LEVEL and EFFECT LEVEL controls

• HOUSE input with stereo RCA connectors and a dedicated LEVEL control. 
• This input is located within the Ch. 6 section but is in fact a totally separate 7th input for a stereo HOUSE source such as a CD player

MATRIX-600 REAR PANEL

• Two full-range speaker outputs - 300 watts RMS each 
• Combo Speakon & ¼” connectors allows the flexibility of using different speaker cables
• The PATCH section is designed to connect an optional external amplifier, insert a multi-band EQ or to use inputs of the MATRIX-600 power amp section
• Stereo RCA RECORD outputs and mono quasi-balanced ¼” MONITOR output
• ¼” TRS connection for footswitch allows the muting of either the MAIN outputs or the DSP effects
• XLR subwoofer output and SUB on/off switch to connect a powered subwoofer
• When the SUBWOOFER switch is in the ON position, the system automatically  reduces the low frequency signals to the satellite speakers
• ¼” output for stereo HEADPHONES with a LEVEL control and routing to either the MAIN or MONITOR outputs

• 3-way rear-ported speakers substantially outperform traditional 2-way designs in virtually every application
• 10" high excursion woofer for extended and tight bass
• 6.5” midrange with oversized magnet for clarity and wide coverage area
• 1” exit phenolic tweeter on an exponential horn matches the acoustic response of  6.5" midrange driver
• Premium quality X-overs with air core inductors and Mylar capacitors for clean and unrestricted SPL peaks
• Light bulb protection circuitry on the tweeters for worry-free operation
• Built in suspension points for permanent installation
• 16-guage steel grilles, rubber feet and a conveniently located top handle

INCLUDED ACCESSORIES
Two 20’ speaker cables (with ¼” plugs)
Two speaker covers
One mixer/amplifier carrying bag