 |
The MATRIX-1000
V2 is
a complete sound
reinforcement
SOLUTION comprised
of two 10”
two-way powered satellites
and a dedicated powered
15” subwoofer.
The MATRIX-1000
V2 has a built-in
three-channel 700-watt
power amplifier, three
distinct volume controls,
electronic crossover
with equalization and
VCA compressor.
The circuitry is designed
and fine-tuned to integrate
all components for the
best possible sound.
There is no need to tweak
or finesse settings on
a crossover or compressor
to make your system sound
great. Simply roll the
system into place on
its heavy duty casters,
plug in the AC, connect
the two speaker cables,
run two XLR cables to
your mixer and you’re
ready to go! |
|
|
|
MATRIX-1000V2
Reviewed!
I Download the Instruction Manual
V2
UPGRADES: THE BEST JUST
GOT BETTER
•
A new high-performance
compression driver for
a smoother frequency
• response
and lower distortion throughout
the upper midrange frequencies.
• A new elliptical
wave guide with more uniform
dispersion.
• The addition of
a voltage controlled amplifier
(VCA) on all three amplifier
• channels
to minimize the effects of
amplifier clipping. This
lowers the
• maximum
distortion produced at VERY
high drive levels and offers
additional
• protection
for the speaker components.
• More durable FREE
dust cover.
• Improved B-52 handles. |
SUGGESTED APPLICATIONS:
Mobile
DJ * Karaoke * Nightclub, Restaurant,
Bar Install * Corporate Audio / Video
* Home
Entertainment System * Live Sound System
* Stage Monitoring System * Booth Monitoring
System * Drum Monitoring
|
Download
the Matrix 1000 Instruction Manual
|
BUILT-IN
3-CHANNEL AMPLIFIER
The
15” subwoofer
enclosure is
divided into
two separate
compartments.
The front chamber
serves as the
cabinet for
the 15” subwoofer.
The rear chamber
houses all
of the system’s
electronic
circuitry,
which includes
the amplification
for all three
components,
power supply
and preamps.
The 15” subwoofer
has a power
handling capability
of 400 watts
and a nominal
impedance of
8 ohms. |
 |
|
|
 |
10"
SATELLITE SPEAKERS
The MATRIX-1000V2 satellites are loaded with a custom designed
10” speaker
and 1” titanium diaphragm compression driver. The “horn” is
a 90 by 60 elliptical waveguide that can be rotated 90 to optimize the dispersion
pattern to best suit your particular application. These versatile speakers are
pole-mountable and can sit as stage monitors. They also include 3/8” – 16
tpi flying hardware for small venue permanent installations. The rounded front
of the satellite speaker is a perfect fit for the convex face of the subwoofer,
allowing a mobile entertainer to stack, roll and transport the entire MATRIX-1000V2 in and out of a venue in record time. |
|
|
TRANSPORTING
THE SYSTEM
To
transport the
MATRIX-1000
V2, simply
set the subwoofer
on its casters
and place the
satellite speakers
on to the subwoofer’s
front panel,
facing down.
Fasten the
satellites
with the included
locking strap
using the handles
on either side
of the subwoofer
cabinet. Place
the included
cover over
the entire
system and
you’re
ready to move
the MATRIX-1000
V2 with ease. |
 |
|
|
SPECIFICATIONS:
|
700-WATT 3-CHANNEL AMPLIFIER
|
Subwoofer
Power Output
10” Two-way Power Output
Line in:
Parallel out:
Input Impedance:
Speaker Out:
Power Requirement: |
400
W
150
W
XLR Female
XLR Male
48 k Ohms
Speakon NL4 Style Connector
115V<>50/60Hz<>10A
230V<>50/60Hz<>6A |
|
|
15"
SUBWOOFER
|
Speaker:
Nominal
Impedance:
Subwoofer
Freq. Response:
Sound
Pressure Level (1w/1m):
Max.
SPL:
Weight:
Dimensions
(Transport): |
15”
Custom Built B-52 Subwoofer
8 Ohms
40 Hz; 120 Hz +/- 3dB
102 dB (half space)
127 dB @1% THD
120 lbs
28” (H) x 19” (W) x 23” (D) |
|
|
10'
TWO-WAY SPEAKERS
|
Speaker
Input:
LF/MF Woofer:
HF Driver:
HF Dispersion:
Nominal Impedance:
Active Freq. Response:
Crossover Frequency (passive):
Sound Pressure Level (1w/1m):
Max. SPL:
Weight:
Dimensions (Upright): |
Speakon
style connector
(pin 1+ = +, pin 1- = -)
10” Custom Built B-52 Transducer
1” Titanium Diaphragm
90 x 60
4 Ohms
120 – 19K Hz +/- 3dB
2.5 kHz; 12 dB / Octave
101 dB (half space)
124 dB @10% THD
30 lbs
19” (H) x 12” (W) x 11”
(D) |
|
|
|
COMPLETE
SYSTEM
|
Weight:
Dimensions
(Transport): |
180
lbs
39”
(H) x 19” (W)
x 23” (D) |
|
FEATURES
 |
